Products
Beam
Beam Drawing
Beam Appliance
Product Introduction:
   SISIC/RSIC beam has the excellent load-bearing ability, size stability, oxidization resistance and corrosion resistance under high temperature, especially as the structural beam in ceramic kiln.
Usage Introduction:
  1. Blow the beams by compressed air before using, to clean the scruff and dust of the surface.
  2. Please notice the mark of working side when set the beams, should load the product on the working side.
  3. The beams should be set steady, insure the pairs of beams load-bearing equably, and not over the security load-bearing.
  4. When set the beams, the length of interface between beams and supports should be over 80-100mm, and the interface should be level.
  5. During physical handling or loading and unloading, avoid damage the ends of the beams, we suggest that insert rubber or foam jacket to the ends of beams, and place the beams on the special pallet or convey cars to storage.
  6. If the warpage of beams over 1.0%, please change it timely.
Beam technical data
Cross-section (mm) Length(mm) Uniformly distributed force
B H ¦Ä SISIC RSIC
30 40 6 1500 260 850
40 40 6 1500 330 1200
40 50 6 1500 470 1670
50 60 7 1500 828 2890
Other sizes are available on request.
 
ÎÞ±êÌâÎĵµ
Copyright(s) www.stonebase.com.cn All Rights reserved.
TEL: 86-10-61116768  FAX: 86-10-61117726