Products
Roller
Roller Drawing
Roller Appliance
Product Introduction:
   SISIC/RSIC roller is a key part of roller hearth kiln, which has excellent load-bearing ability and thermal shock resistance under high temperature, so it can be applied in the sintering zone of high temperature roller hearth kiln for tableware, sanitary ceramics and electronic porcelain.
Usage Introduction:
  1. Place the roller on the top of furnace to preheat, till all the water in the roller steamed completely.
  2. When change the roller, insert the roller into the furnace with turning, the turning direction should as the same as running direction of other rollers to heat equably.
  3. Keep equable temperature in the furnace, avoid high temperature of some point in the furnace and result the roller warp age.
  4. Clean the binding on the surface of roller timely, don¡¯t place the roller on the ground or metal shelf directly after draw out the roller from furnace with high temperature, should better place the roller on the fiber with fireproof and keep the roller turning, do not place the hot roller in the high breezy environment.
  5. Fill ceramic fiber at the two ends of roller to proof the heat diffused.
  6. Adjust and clean the drive system of roller timely, insure the roller running with equable speed and parallel.
  7. Recommend use high quality plate (RSiC plate), avoid the separate matter from plate pollute and affect the working life of roller.
  8. If the power stopped, please keep the roller turning in the furnace.
Roller technical data
Cross-section (mm) Length(mm) Uniformly distributed force
D1 D2 ¦Ä SISIC RSIC
35 23 6 1000 460 1900
40 28 6 1000 700 2500
42 30 6 1000 790 2500
45 33 6 1000 930 2800
50 38 6 1000 1210 3000
Other sizes are available on request.
 
ÎÞ±êÌâÎĵµ
Copyright(s) www.stonebase.com.cn All Rights reserved.
TEL: 86-10-61116768  FAX: 86-10-61117726